note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: r00005b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sdr11 __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level pin configuration __ = normal (cathode to stud) (see table 1) r = reverse (anode to stud) family/voltage 83 = 50v 84 = 100v 85 = 150v 86 = 200v 87 = 300v 88 = 400v 89 = 500v 90 = 600v sdr1183 thru SDR1190 35 amp 50-600 volt 5 sec standard recovery rectifier features : ? low reverse leakage current ? single chip construction ? piv to 600v ? hermetically sealed ? low thermal resistance ? higher voltage devices up to 1400v available* ? fast and ultra fast recovery versions available* ? for reverse polarity add suffix ?r? ? replacement for 1n1183, 1n1184, 1n1185, 1n1186, 1n1187, 1n1188, 1n1189, and 1n1190 ? tx, txv, and s-level screening available 2 / *contact factory maximum ratings symbol value units peak repetitive reverse and dc blocking voltage sdr1183 sdr1184 sdr1185 sdr1186 sdr1187 sdr1188 sdr1189 SDR1190 v rrm v rwm v r 50 100 150 200 300 400 500 600 volts average rectified forward current (resistive load, 60 hz sine wave, t a = 25 c) io 35 amps peak surge current (8.3 ms pulse, half sine wave, t a = 25 c) i fsm 500 amps operating & storage temperature t op & t stg -65 to +150 oc maximum total thermal resistance junction to case r jc 1.0 oc/w notes: 1/ for ordering information, price, operati ng curves, and availability- contact factory. 2/ screening based on mil-prf-19500. screening flows available on request. do-5:
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: r00005b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sdr1183 thru SDR1190 electrical characteristics symbol max units instantaneous forward voltage drop (i f = 35 adc, t a = 25 oc, 300 s pulse) v f 1.4 v dc instantaneous forward voltage drop (i f = 35 adc, t a = -55 oc, 300 s pulse) v f 1.6 v dc reverse leakage current (rated v r , t a = 25 oc, 300 s pulse minimum) i r 20 a reverse leakage current (rated v r , t a = 100 oc, 300 s pulse minimum) i r 2 ma reverse recovery time ( i f = 500 ma, i r = 1 amp, i rr = 250 ma, t a = 25 oc) t rr 5 sec junction capacitance (v r = 10v dc , t a = 25oc, f = 1mhz) c j 250 pf table 1- pin assignment code configuration terminal stud __ normal anode cathode r reverse cathode anode do-5 outline (normal pi n configuration shown):
|